Starting; Save-Smart Eco - Fakir HT 1600 Motion Bedienungsanleitung

GB
Operation

Starting

Save-Smart Eco

HT 1600 MOTION
1. When the Heater is initially plugged in, there will be a
"beep" and the Power Light will come on indicating that
the unit is receiving power. The Power Light will remain
lit until the heater is unplugged from the outlet.
2. Turn the Heater ON by pressing the On/Off button. The
unit will be in HIGH (Hi ) heat when the heater is turned
on.
3. Pressing the On/Off button will set the Heater into low
heat.
4. To turn the Heater off, press the On/Off button again
(third time) and unplug the unit from the outlet.
1. Press to enable Save-Smart Eco function while the
unit is operating. The function is enabled as follows,
NOTE!
The default Save-Smart Eco temperature is 24C°.
26