auna Ultrasonic BT Bedienungsanleitung Seite 23

repeatedly. The station frequency will show on the display.
• Press and hold the /TUN+ or /TUN- button to quick scan the
stations that with strong signal.
Auto preset memory / scan
To scan for stations within reception range and save them to preset
memory automatically, press and hold the PLAY/PAUSE/PAIR/SCAN button.
After the unit is finished scanning, the unit will automatically tune to preset
number 1 (P01).
Manual preset memory operation
Choose which stations to save in preset memory instead of scanning
automatically.
1. Use the /TUN+ or /TUN- button to tune to the station that you want
to save as a preset (e.g., 93.1).
2. Press the P-MODE/M./ECHO button. "P01" will flash on the display to
indicate that you are saving the station as Preset Memory 01. (To change
the preset memory number, press the 10/M./FOLD.+ or 10/M./FOLD.-
buttons.)
3. Press the P-MODE/M./ECHO button to finish saving the station (e.g., P01
is now set to 93.1).
4. To save another station, repeat steps 1 to 3. You may save up to 30 FM
stations.
To tune to a preset station
• To tune to the next preset station, press the 10/M./FOLD.+ button.
• To tune to the previous preset, press the 10/M./FOLD.- button.
USB operation
1. Press the FUNCTION/
2. Plug the USB memory stick to the USB port on top of the unit. Playback
will start automatically.
3. To pause playback, press the PLAY/PAUSE/PAIR/SCAN button on unit.
The playing time will flash on the display.
4. To resume playback, press the PLAY/PAUSE/PAIR/SCAN button again.
5. To select a desired track, press the /TUN+ or /TUN-, button
respectively during playing until the desired track appears on the display.
The unit will start play automatically.
6. To search for a particular passage during playback, press and hold the
/TUN+ or /TUN-, button to scan the current playing track at high
speed until desired point (passage) appears, then release the button for
normal playback mode.
7. To select a song which track number exceeds 10, press the 10/M./FOLD.+
or 10/M./FOLD.- button each time to skip forward/backward 10 tracks,
then press the /TUN+ or /TUN- button to select desired track.
8. To select a desired folder (if the USB contains more than one folder),
button on unit to select USB mode.
EN
23