auna Ultrasonic BT Bedienungsanleitung Seite 22

EN
22
Adjusting the volume
1. Press the VOL.+ or VOL.- button to increase or decrease the music
volume.
2. Rotate the MIC VOL. knob on the unit to increase or decrease the
microphone volume.
Equalizer (EQ)
This unit has a built-in equalizer system, press the EQ/LIGHT button on unit
to select a setting that best matches the music style: FLAT, POP, CLASSIC,
JAZZ, and ROCK.
Microphone echo adjustment
MICROPHONE ECHO ADJUSTMENT
Press and hold the P-MODE/M./ECHO button on unit to turn on or turn off
the microphone echo effect. When the echo effect is on, the display will
show "ECHO".
Flashing light
There are 5 modes for the DISCO LED lighting above the speakers. Press
and hold the EQ/LIGHT button to choose the desired light mode. To turn off
the light effect, press and hold the EQ/LIGHT button until OFF shows on the
display.
L-1: Blue LED will be on constantly when it is selected.
L-2: Blue LED will be on flashing mode.
L-3: Red LED will be on constantly.
L-4: Red LED will be on flashing mode.
L-5: 7 colors LED will be on flashing mode.
There's a light bar above the handle, the white light on when the Blue/Red
LED on constantly, the bar will keep flashing when LED in flashing mode.
Press and hold the EQ/LIGHT button until OFF shows on the display to turn
it off together with the disco light.
Radio operation
Listen to FM radio broadcasts. Press the FUNCTION/ button on the unit to
choose FM mode, the display will read the radio frequency.
Note: In order to get the best reception, extend the FM wired ANT. on the
rear cabinet to its full length before use. If stereo signal is received, the
display will show the "ST" indicator.
Tuning to a radio station
If you know the station frequency that you want to tune to directly:
• Tune to a station by pressing the /TUN+ or /TUN- button