Active Backlight - SubGear XP10 Bedienungsanleitung

• If the bar graph shows 2 segments, the battery symbol will blink, on the surface and in dive
mode, to alert the diver of a dangerous situation: the battery may not have enough energy to
finish a dive.
• Replace the battery when the steady battery symbol appears (3 segments)!
F
The temperature influences the battery performance. In cold water it is lower than in
warm water. If the battery shows 4 segments on the surface, it is possible for it to
drop to 3 segments during the dive. If this is the case, the backlight will be tempo-
rarily disabled. See below.
Bar graph
interpretation
XP10 marks dives started with 3 or less segments in the logbook with the battery symbol.
Logbook information is not lost even when the battery is removed for a long time.

2.10 Active backlight

The display of XP10 can be illuminated both on the surface and underwater.
The backlight can be activated by pushing
The backlight can only be activated if the computer display is on.
F
Repeated activation of the backlight will reduce battery life.
! WARNING
Battery performance high enough for diving.
Battery warning appears. Backlight deactivated. Replace the battery! ->37
Flashing battery warning. Audible alarms and attention
messages disabled! Backlight deactivated! Risk of computer
malfunction. Do not let the battery reach this condition!
Diving not possible, dive planner and settings are disabled
! WARNING
. The light will turn off automatically after 6 seconds.
Operation
15