AEG SR 4842 BTS Bedienungsanleitung Seite 36

English
36
3. Choose the Bluetooth menu in your player and register
the appliance in your player. For this, refer to the operation
manual of your player. The appliance "AEG SR 4842 BTS"
will show in your player as a selection.
NOTE:
• Only one playback appliance can be connected with
the appliance at one time. If the appliance is already
connected with another playback appliance, the
appliance will not appear in the BT selection menu.
• Keep the / button pressed to disconnect
an existing Bluetooth connection. "
flashing in the display.
4. Now enter the password "0000" in your player, depend-
ing on the appliance manufacturers, model, and software
version.
After successful registration, "
hear the speaker announcing "CONNECTING". For the
further procedure, please refer to the user manual of the
playback unit. If possible, adjust the volume of the external
unit to a comfortable level.
NOTE:
• Depending on the appliance manufacturer, you need
to perform the registration (PAIRING) again to connect
the appliances.
• In case of problems with the registration of a replay ap-
pliance, deactivate the WiFi- / and mobile data function
in your playback appliance.
• The Bluetooth compatibility cannot be ensured for appli-
ances (e. g. mobile phones) getting released in the future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
• Some of the mobile phone brands have an energy-sav-
ing mode. Deactivate the energy-saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to
stay activated in your player. Observe the operation
manual of your player.
• If a mobile phone on which you are playing music re-
ceives a call, the music will be interrupted. Press the /
button to receive the call. The sound will be played
back through the radio. Speak towards the microphone
or transfer the call to your mobile phone. When doing
this, please refer to the fade-in on the display of your
mobile phone. After you have terminated the phone
call, the playback will resume.
• When the appliances get disconnected, the speaker will
announce "SPEAKERS DISCONNECTED". "
flashes in the display.
SR4842BTS_IM_new
Description of the Control Buttons
• Bluetooth music
" starts
• Speakerphone operation
" appears and you will
Press once
Press twice
Press three times = Plays a preceding title, etc.
You can use this button to jump to the next title or the title
after the next title etc.
Cleaning
• Disconnect the mains plug before cleaning.
• You may wipe off external stains, using a slightly damp
Troubleshooting
"
NOTE:
• Not all the functions may be supported depending on
the playback appliance.
• Depending on the appliance, you must start the music
app on your playback appliance beforehand.
/ (4)
You can briefly interrupt and resume playback using this
button. Pressing again continues playback.
- Press the button to answer or finish an incoming call.
- Press and hold this button to reject an incoming call.
(3)
= Starts the current title again from the
beginning.
= Jumps to the preceding title.
(5)
CAUTION:
Do not immerse the appliance in water.
cloth without any additives.
Problem Cause
The unit The unit is
cannot be blocked and
operated. "hangs".
No sound. Volume is too
low.
Poor sound Radio signal too
quality. weak.
Solution
Disconnect the power
supply for 5 seconds.
Then switch the
appliance on again.
Increase the volume.
Try to adjust the
antenna position.
03.07.17