Listening To The Radio - AEG SR 4842 BTS Bedienungsanleitung

NOTE:
• If you charge your smartphone and the appliance-inter-
nal battery at the same time, it will take longer until both
appliances are fully charged.
• Depending on the charge level of the battery, the USB
jack can provide a charging current of up to 1 A. Appli-
ances such as tablets PCs that need charging currents
of up to 2500 mA cannot be charged.
• Battery mode only (powerbank function):
If the charging capacity is too low, the USB charging
jack will turn off automatically.
• A playback of audio-files through this connector is not
possible.

Listening to the Radio

Hints for FM Reception
• The FM reception depends on the location.
Follow the steps below:
- Completely extend the telescopic antenna.
- If necessary, change the position of the telescopic
antenna to improve the reception.
• Depending on the location, some station may not be
received in your region or only with interference. This is
not a malfunction of the appliance!
Scan FM Stations
1. Select the radio mode with the M button.
2. You have two possibilities to look for and store radio
stations.
Automatic Station Scan
Important! Any previously stored radio stations will be
overwritten. The appliance searches only for the strongest
stations. Up to max. 30 stations will be memorized with
this. Depending on the location, the number of detected
stations can differ widely.
Press and hold the / button for approx. 3 seconds.
The appliance is searching the complete FM frequency
band for radio stations. The stations found are stored
ascending by frequency.
Tune the desired stations with the
tons. When holding down either of the buttons, the
appliance will start scanning until the next radio station
is found. The display will show the respective frequency.
The manually tuned stations cannot be stored.
Cycling through the stored stations
You can cycle through the stored stations by repeatedly
pressing the / button.
SR4842BTS_IM_new
Playing Back Music Files
There are two ways to play music files: using a cable or
cordless via Bluetooth.
By Cable (Cable not included)
1. If required, use a suitable adapter (not included).
Connect the external appliance as follows:
• Connect to the AUX IN socket using a 3.5 mm stereo
2. Use the M button to select AUX IN mode.
3. Start the playback of your audio source. Listen to the
sound playback via the speaker.
4. For the further procedure, please refer to the user manual
of the external audio source.
NOTE:
If possible, adjust the volume of the external unit to a
comfortable level.
Playing Back Music via Bluetooth
Bluetooth involves a technology for wireless radio connection
of appliances over a short distance. Appliances with Blue-
tooth standard are transmitting between 2.402 and 2.480 GHz
in the ISM band (Industrial, Scientific and Medical). Interfer-
ence can be caused for example by WLAN-networks, DAB
radios, cordless phones, or microwave ovens which work on
the same frequency band.
This appliance offers you the possibility to use a Bluetooth-
enabled appliance. The functional radius is limited to approx.
15 metres depending on the surroundings and the unit used.
If your playing appliance supports the A2DP profile (Ad-
vanced Audio Distribution Profile) and has a music-player
function, then you can also wirelessly transfer music to
the appliance. The A2DP profile involves a multi-vendor
Bluetooth profile. By streaming, stereo-audio signals are
wirelessly transferred between the playing appliance (source)
and the receiving appliance. To be able to remotely control
the source, the playback appliance must support the AVRCP
profile (Audio Video Remote Control Profile.
Due to the different appliance manufacturers, models, and
+ and but-
software versions, a full functionality cannot be guaranteed.
Logging on Appliances (Pairing)
Before you listen to music via the unit, you must pair the
appliances.
1. Ensure, that the Bluetooth function is activated in your
player (e. g. mobile phone). For this, refer to the operation
manual of your player.
2. Use ther M button to select BLUETOOTH mode. "
starts flashing in the display. Shortly after that you will hear
the speaker announcing "PAIRING". This signalizes that
the appliance is in pairing mode.
jack plug cable.
English
35
"
03.07.17