Signs And Symbols Used; Scope Of Delivery; Putting Into Operation - Abicor Binzel PSB 31 Betriebsanleitung

4 Scope of delivery

3.3 Nameplate

3.4 Signs and symbols used

Symbol Description
• Bullet symbol for instructions and lists

Cross reference symbol refers to detailed, supplementary or further information
1 Step(s) described in the text to be carried out in succession
4 Scope of delivery
• Cutting torch body (type as ordered)
• Cable assembly
Tab. 8
Scope of delivery

5 Putting into operation

EN - 8
The PSB manual cutting torches are marked with a label on the torch handle
and the AUT PSB automatic cutting torches with a label on the handle tube.
When making enquiries, please note the following information:
• Type designation on the torch handle, for example PSB 121 on the
manual cutting torch.
The following signs and symbols are used in the operating instructions:
The standard scope of delivery includes the following components:
Order the equipment parts and wear parts separately.
The order data and ID numbers for the equipment parts and wear parts can be
found in the current product catalogue. Contact details for advice and orders
can be found online at www.binzel-abicor.com.
The plasma cutting torches in the PSB series are exclusively intended for the
cutting of low- and high-alloy materials using compressed air for industrial or
commercial use by trained operators. These plasma torches are air-cooled
cutting torches.
• Handle
• Operating instructions
PSB