Cleaning The Hob - AEG HG795840NB Benutzerinformation

• Wash stainless steel parts with water,
and then dry them with a soft cloth.
7.2 Pan supports
The pan supports are not
resistant to washing in a
dishwasher. They must be
washed by hand.
1. Remove the pan supports to easily
clean the hob.
Be very careful when you
replace the pan supports
to prevent the hob top
from damage.
2. The enamel coating occasionally can
have rough edges, so be careful
when you wash the pan supports by
hand and dry them. If necessary,
remove stubborn stains with a paste
cleaner.
3. After you clean the pan supports,
make sure that they are in correct
positions.
4. For the burner to operate correctly,
make sure that the arms of the pan
supports are aligned with the centre
of the burner.
7.3 Removing pan supports
After cleaning hobs, make sure that pan
supports are in a correct position. In
order to properly place the pan
supports, make sure that an arm of the
pan support is positioned in
correspondence with the grips placed at
the base of the burner as shown in the
picture. This way, the pan support will be
stable and fixed.

7.4 Cleaning the hob

• Remove immediately: melted plastic,
plastic foil, sugar and food with sugar.
If not, the dirt can cause damage to
the hob. Take care to avoid burns.
• Remove when the hob is sufficiently
cool: limescale rings, water rings, fat
stains, shiny metallic discoloration.
Clean the hob with a moist cloth and
non-abrasive detergent. After
cleaning, wipe the hob dry with a soft
cloth.
7.5 Cleaning the flame
spreader
You can wash the flame
spreaders in a dishwasher.
ENGLISH 13