Nilfisk VP100 Bedienungsanweisungen Seite 8

OPERATING INSTRUCTIONS ENGLISH
 Do not clean hot materials such as fireplaces, roasters and other objects containing hot
materials
 Do not vacuum water,liquids or flammable gasses.
 If the power cord or plug has any damage, do not use this machine. Before using the machine,
check the power cord and plug is not damaged or shows signs of ageing. If any damage is found
to the power cord or plug, please contact the nearest authorised service center.
 Don't touch the power cord and plug when your hand is wet. When you need to remove the
plug, always hold the plug (not the cable), then pull the plug out of the power socket. Before
carrying out any maintenance on the machine you should turn off the power and remove the
plug from the power socket.
 This machine is only to be used by persons who have been trained and have read this manual.
Storage
1. Storage mode of cleaner accessories (crevice tool,dusting brush) can be referred to in picture
F3.
2. For the correct way to carry the machine with accessories, refer to picture F4. The incorrect
in picture F5
way to carry the machine is refered to
3. For machine stacking storage, refer to picture F6.
Circuit connection diagram:
Circuit connection diagram is referred to in F7.
Product specification parameter
For specification parameters refer to " F8".
8