Warning Notice; Safety Notice; Installation Method - Avtek Tension Gebrauchsanweisung

High Qualified Tension Screen - User Manual
1. It is normal to see slight horizontal marks on fabric
after long storage but they will disappear gradually
if the fabric has been unrolled for a short period.
2. It is also normal to see slight marks on both sides of
black border after long storage but they will
disappear it the fabric has been unrolled for a short
period.
3. Before installation of the projection screen on a
wall or ceiling and make sure that it can afford the
weight of the screen.
4. Dust, dirt and scratches on the projection surface
will affect the picture quality. For prevention, take
notice of the points below:
Do not touch the projection surface with hands.
§
Do not write or draw on the projection surface.
§
Do not use fingers or sharp objects to point on
§
the projection surface as this will damage the
screen fabric.
Use a soft damp cloth to clean the projection
§
surface only.
Do not use chemical cleaning agents or alcohol.
§
Use clean water.
§

Installation Method

The screen can be wall mounting or ceiling hanging,
users can choose the most suitable method
according to their needs.
For wall mounting or ceiling hanging on a wooden
surface, use ø6x60mm wood screws.
For wall mounting or ceiling hanging on a brick,
concrete or plaster surface, use ø6x60mm screws
with screw anchors or wall plugs.
There are three ways for installation with pictures below, please make sure which kind of installation suit for your
surroundings first.

Warning Notice

SAFETY NOTICE

Misuse of the screen may cause damage
to the screen or injury to persons.
Warning
To prevent damage to the screen and
injury to persons, the screen must be
mounted correctly and securely.
Do not hang things from the screen or
climb on it. Doing so may cause the screen
to fall off and damage the screen and
cause injury.
Retract the projection surface back into the
case after use. This will protect it from dust
and dirt, and prevent it from loosening.
Do not disassemble the screen. Doing so
may damage the screen and cause the
screen fabric to fall down. If the screen
needs repairing, contact the dealer from
whom the screen was purchased.
Installation hole 2
Installation hole 1
Lifting nut
Screen house
Ring-pull
5