Vermeiren Normandie XXL Gebrauchsanweisung Seite 17

3.3.1 Mounting backrest
For assembly of the backrest, you should lay the model on a flat surface on its side.
Move the backrest backwards until the sockets on the lower back frame and the
A
suspension eye of the pneumatic spring lie over one another.
Guide the locking pin  through the back sockets and the pneumatic spring. Two
B
plastic washers  are to be inserted before and after the pneumatic spring socket as
a spacer guide. Afterwards, secure the locking pin  by guiding the tension spring 
over the pin until it projects out over the end of the spanning pin.
3.3.2 Mounting seat
L
WARNING:
Risk of injury – Make sure that no objects or body parts come
between the seat and the frame.
The seat is attached to the basic frame with clamping fixtures.
B
A
B
A
Page 15
Provence, Normandie, Languedoc
1 = seat
2 = curved fixture
3 = back crossbar
4 = clamp
5 = front crossbar
2016-01