Quax LOFT 54F 01 00xXLXL serie Bauanleitung Seite 32

LOFT
Quax
First dreams
First steps ®
5. The conversion to junior bed
Step 1 : Use the mounted cot
Remove the upper structure from the chassis. Loosen the bolts (E) and remove the sides with bars. Loosen the
bolts (K) in the bottom. Remove the bottom from the threaded pins (I) .
Step 2 : Use the leg frame of step 1 and the end side P2
Loosen the bolts (A) on the outside of the lower sides. Disassemble all parts. Move a pair of legs to the end side
(P2). Push two bolts (H) into the drillings of each leg and tighten them in the nuts of the end side. Press the bed-
sides with their wooden dowels into the lowest drillings of a lower side (P3). Push the bolts (A) into the drillings
on the outside of the lower side and tighten into the bedsides. Press the end side onto the wooden dowels of the
bedsides. Push the bolts (A) into the holes on the outside of the end side and tighten into the bedsides.
32
54F 01 00xXL
Omvormbaar kinderbed 140x70 cm
Umwandelbares Kinderbett 140x70 cm
Lit bébé convertible 140x70 cm
Convertible baby cot 140x70 cm