Use And Operation - oneConcept 10010604 Bedienungsanleitung

1) Power / Volume Knob
2) Tone Knob
3) Selector knobs of the bands
4) Tuning Control
5) Antenna
6) AC Power cord
7) Battery Compartment
Connection with the unit
• Check the characteristics of the AC power (AC 230V ~50Hz).
• Place the apparatus in a sure place while taking care to preserve a suffi cient space of ventilation all
around the apparatus (10 cm) so that the heat generated at the time of operation can be evacuated
without obstacle.
• Connect the AC power cord with the back of the apparatus (6) and on the unit.
• When the apparatus is connected on the AC, withdraw the Battery.
Operation with Battery
Open the battery compartment (7) located at the back of the apparatus and introduce 6 batteries 1,5V
of the type UM-2/C (NOT SUPPLIED) while taking care not to reverse the poles. Then, close again the
compartment.
Radio Mode
Important: In mode OUC-FM / OC-SW, entirely deploy the antenna (5).
1) To turn on the unit: Turn the Power On/OFF button (1) in the direction of the needles of a watch.
2) Choose the range of waves using the buttons - Selector knobs of the bands (3).
3) Adjust the station using the tuning control (4).
4) Adjust the sound volume using the volume knob (1).
5) Use the Volume knob (1) to adjust the volume as desire.
6) To turn off the unit: Turn the Power ON/OFF button (1) in the direction reverses needles of a watch
until you hear the "click" sound.
Tone Knob
You can adjust the pitch as desire by using the Tone Knob (2).
OUC-FM
OM/AM
OC/SW
OL/LW
Operation on AC
Operation on DC
Absorptive power
Power max.

Use and Operation

Specifi cations
88 - 108 MHz
530 - 1600 KHz
6 - 18 MHz
150 - 285 KHz
230V AC 50Hz
9V 6x UM-2/C 1.5V (Battery not included)
Max. 14W
10W P.M.P.O
6