Part Description - Sunred SMQ2000A Handbuch

Part Description

1 Heating Element Assembly
2 Knob
3 Body
4 Position Indication Plate
5 Pull Switch
6 Tube Cover
7 Upper Post Assembly
8 3 -M5 X 6 Screw
9 Middle Post
10 3-M5 X 6 Screw
11 Lower Post Assembly
12 Clamp
13 Power Cord
14 Base Cover
15 4-M6 X 30 Screw
16 Base Assembly
17 3-Ø4*30Screw expansion screw of the chassis is fixed to the floor，
The heating apparat atus can not move or dumping
WARNINGS
■ This electrical appliance complies with technical safety and electromagnetic compatibility standards.
■ Never touch your heater when in operation (risk of burns).
■ Never touch it with wet hand.
■ Never rotate the heating part of the appliance during operation. To change the tit angle of the heating part, we advise you to wait for
15 minutes after the appliance has been switched off.
■ Never place anything on your heater's safety guard as this may cause overheating (e.g. towels)
Never use your appliance to dry washing.
■ Although the heating element has stopped glowing, it may still be live and potentially dangerous. Check that the selection indicator
(5) is in position off before taking any action.
■ Switch off your appliance:
- After use
- In the event of malfunction
- Before cleaning it.
■ Never operate your appliance if it has fallen over.
■ Never dismantle your appliance. An incorrectly repaired appliance maybe dangerous to the user. If you encounter any problems,
please take it to one of the Approved Service Centers in our customer service network
■ The warranty will be void in the event of damage arising from improper use.
■ Do not use this heater in the immediate surrounding of a bath, a shower or a swimming pool.
■ This movable appliance is designed for use in gardens, and can be used indoor and outdoor. The warranty will not apply to
appliances used for professional usage. Although the heater may be used outdoors, the main plug must only be connected to the supply
indoors.
■ The heater is provided with an anti-tilt switch will switch off the heater if it is overturned, and will switch it on again automatically when
it is restored to its upright position.
■ The instruments in the minimum installation height 1.8 meters
VOLTAGE
Before using the appliance at the first time, ensure that your mains voltage corresponds to voltage indicated on the appliance. It is a
class I appliance and must be earthed.
www.sunred.nl