Understanding The Control Functions; Powering On/Off - auna MC-20 Bedienungsanleitung

NOTE: Connecting the unit to any other power source may cause damage to
the unit.

UNDERSTANDING THE CONTROL FUNCTIONS

Powering on/off

When you first connect the unit to the mains socket, display will show the
"00:00:00". If you can receive a DAB+ signal in your location, the unit will
synchronize to the current local time. After approximate one minute, it will
switch to STAND BY mode.
• Press the STANDBY on the unit or on the remote control to switch the
unit to ON mode.
• Press the STANDBY on the unit or on the remote control to switch the
unit back to STANDBY mode.
• Disconnect the mains plug from the mains socket if you want to switch
the unit off completely.
NOTE
When the unit is idle for approximately 15 minutes, it will automatically
switch to standby.
• Please turn the unit o completely to save energy when not in use.
Adjusting the volume
• Turn the VOLUME +/– control on the unit or press the VOLUME +/–
buttons on the remote control to increase/decrease the volume.
• If you wish to turn the sound 0, press the MUTE button on the remote
control. Press the MUTE button again or press the VOLUME +/– buttons
on the remote control or turn the VOLUME +/– control on the unit to
resume normal listening
EN
35