Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Speed regulator (33/45rpm)
•
Connect the device to a household mains socket.
•
Connect the LINE OUT to your HiFi (AUX IN or PHONO IN) or to your PC (MIC IN/LINE IN), using
the supplied audio/RCA cable.
•
Slide the mode switch (11) to the desired position (BT / LINE OUT)
•
Place a record on the platter. Add the puck to center, if needed.
•
Set the desired speed with the speed switch.
•
Lift the tone arm, pressing UP. Then, hover the tone arme carefully towards the record grooves.
Press DOWN to lower the tone arm until it touches the vinyl.
•
Enjoy your vinyl record.
•
Press STOP to stop playing. Else, when the record comes to an end, the player stops automati-
cally. Lead the tone arm back to the tone arm stand.
•
Protect the stylus/needle with the cover, as long the record player is not in use for a longer while.
•
Slide the MODE switch (11) to BT.
•
Switch your BT speaker/amplifier on and activate the BT function.
•
Make sure no other BT devices are active within the direct surroundings.
•
An acoustic signal indicates a succesfully established BT connection, and the BT LED stops flas-
hing.
10
45 RPM adapter
1
Turntable
2
STOP button
3
4
Cartridge
5
Up/down button
6
Tone arm stand
7
Operation
General
Tone arm
8
Power Cord
9
LINE OUT (R)/ LINE OUT (L) jack
10
BT/LINE OUT Button
11
BT transmitter LED
12
Dust Cover
13
BT
Werbung
Inhaltsverzeichnis
