Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Do not allow liquids to enter the tool and never immerse it into liquids. Water in
the compressed air inlet can damage the machine. Therefore it is recom-
mended to drain the air lines and the compressor in regular intervals! Also
clean the air filters in regular intervals.

Air Pressure and Air Volume

The air spray gun requires clean and oil-free air. Therefore do not use an oil-
fog lubricator within the air supply system.
If possible, only use compressed air hoses for the air supply that previously
have not been used with other air tools which required an oil-fog lubrication
system.
Operate the air spray gun with a pressure of 4 – 7 bar. When using a higher
pressure than the max. permitted pressure of 8 bar for operating the air tool,
its self life will be reduced drastically. Operate the air spray gun using a com-
pressor with an air suction capacity of at least 130 l/min. The ideal capacity is
provided by compressors with a suction capacity of 150 – 300 l/min.
Only use air hoses with an inner diameter of at least 9 mm. When setting up
the air pressure, always keep in mind that the pressure will decrease by
approx. 0.6 bar when using a 10 m long hose with an inner diameter of
9 mm.
Storing
Store the air spray gun indoors in a dry place that is protected from dust, dirt
and extreme temperatures.
Store the air spray gun out of reach of children.
Using
13

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis