Specifications - Monacor TXA-602/SW Bedienungsanleitung

5.2 Volume attenuation during
microphone announcements
During microphone announcements, the volume
of the audio unit connected to the jack LINE IN
(6) can be attenuated automatically . This will
make it easier to understand announcements .
1) Use the switch MUSIC RETURN TIME (10) to
attenuate the volume:
LONG After an announcement, the attenua-
tion will be deactivated with a delay .
OFF no attenuation
SHORT After an announcement, the attenua-
tion will be deactivated immediately .
2) Use the control DEPTH (11) to adjust the level
of attenuation . When the control is set to the
left stop, the volume will not be attenuated .
When the volume is attenuated during an
announcement, the green LED on the left of
the control will light up .
All rights reserved by MONACOR
reproduced in any form or by any means for any commercial use.
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may be
®

6 Specifications

Amplifier
Rated power: . . . . . . . . . 50 W
Music power: . . . . . . . . . 75 W
Type: . . . . . . . . . . . . . . . mono, class D
Speakers
Bass speaker: . . . . . . . . . 20 cm (8")
Tweeter: . . . . . . . . . . . . . 25 mm (1") horn tweeter
Audio frequency range: . . . 50 – 18 500 Hz
Received frequencies: . . . . 863.05 MHz and
Reception range: . . . . . . . . 30 m approx.
Inputs
MIC/LINE
XLR jack: . . . . . . . . . . . for microphones,
6.3 mm jack: . . . . . . . . . for audio units,
LINE IN (RCA jacks): . . . . for audio units,
Equalizer controls
BASS: . . . . . . . . . . . . . . . ±12 dB at 55 Hz
MIDDLE: . . . . . . . . . . . . . ±6 dB at 1 kHz
TREBLE: . . . . . . . . . . . . . ±8 dB at 10 kHz
Power supply: . . . . . . . . . . 230 V, 50 Hz
Power consumption: . . . . 60 VA max.
Battery type: . . . . . . . . . . rechargeable lead gel
Ambient temperature: . . . . 0 – 40 °C
Dimensions (W × H × D): . 235 × 450 × 280 mm
Weight: . . . . . . . . . . . . . . . 9.7 kg
Subject to technical modification .
864.80 MHz
input sensitivity: 4.5 mV
input sensitivity: 30 mV
input sensitivity: 200 mV
battery, 12 V, 7.2 Ah
11