Switching Off - Stihl TSA 230 Gebrauchsanleitung

English
Switching on the machine
2
Unlock the machine by moving the
N
locking lever (2) to ‚
Make sure you have a firm and
N
secure stance
Stand up straight – hold the
N
machine in a relaxed manner
The abrasive cutting wheel must not
N
touch any objects or the ground
3
4
5
Hold the machine with both hands –
N
left hand on the handlebar – right
hand in the grip area (3) of the rear
handle
Press the trigger switch lockout (4)
N
Press and hold the trigger switch (5)
N
– the engine starts running
The engine only runs if the locking
lever (2) is set at ‚ and if the trigger
switch lockout (4) and trigger switch (5)
are actuated at the same time.
64

Switching Off

2
1
Release the trigger switch (1) and
N
trigger switch lockout (2)
3
Set the retaining latch (3) to ƒ –
N
machine is locked so that it cannot
be switched on
During breaks and after work, remove
the battery from the machine.
NOTICE
If the battery is not removed, there is the
risk that the plug-in contacts on the cut-
off machine and battery become
corroded. Such corrosion can cause
irreparable damage to the cut-off
machine and battery.
Removing the battery
5
4
Press both safety catches at the
N
same time (4) – this unlocks the
battery (5)
Remove the battery (5) from the
N
housing
When the machine is not in use, shut it
off so that it does not endanger others.
Secure it against unauthorized use.
4
TSA 230