Default Exposure Values (Anatomical Exposure Setting) Tables - GENDEX expert DC Bedienungsanleitung

2.5

Default exposure values (anatomical exposure setting) tables

This section presents the default exposure time values for specific anatomy areas (bitewing, lower
molar, upper molar, incisor, and bicuspid). Most values have been preset into the Gendex expert DC
master control touch panel.
Occlusal exposure values are also shown in separate tables. While there is no setting shown on the master
control touch panel for Occlusal exposures, you can manually set the exposure values for Occlusal expo-
sures by pressing the time up or time down arrows on the touch panel.
SP1: D-Speed Film
Anatomy Selected
Bitewing
Lower Molar
Upper Molar
Incisor
Bicuspid
SP2: E-Speed Film
Anatomy Selected
Bitewing
Lower Molar
Upper Molar
Incisor
Bicuspid
SP3: F-Speed Film
Anatomy Selected
Bitewing
Lower Molar
Upper Molar
Incisor
Bicuspid
User Manual 032-0206-03
8" (20cm) Cone
Adult Child
0.320 second 0.160 second
0.320 second 0.160 second
0.400 second 0.200 second
0.200 second 0.100 second
0.250 second 0.125 second
8" (20cm) Cone
Adult Child
0.200 second 0.100 second
0.200 second 0.100 second
0.250 second 0.125 second
0.125 second 0.063 second
0.160 second 0.080 second
8" (20cm) Cone
Adult Child
0.125 second 0.063 second
0.125 second 0.063 second
0.160 second 0.080 second
0.080 second 0.040 second
0.100 second 0.050 second
15
Printed on: , ; Printed by:
Gendex expert
12" (30cm) Cone
Adult Child
0.630 second 0.320 second
0.630 second 0.320 second
0.800 second 0.400 second
0.400 second 0.200 second
0.500 second 0.250 second
12" (30cm) Cone
Adult Child
0.400 second 0.200 second
0.400 second 0.200 second
0.500 second 0.250 second
0.250 second 0.125 second
0.320 second 0.160 second
12" (30cm) Cone
Adult Child
0.250 second 0.125 second
0.250 second 0.125 second
0.320 second 0.160 second
0.160 second 0.080 second
0.200 second 0.100 second
PEXPERTUM December 2007
DC
®