Bridge Mode - Peavey PV 2000 Bedienungsanleitung

System Load
4 OHM Minimum Speakers
A
WARNING!
For optimum performance and rehabdlty DO NOT PRESENT
THE AMPLIFIER WITH A SPEAKER LOAD OF LESS THAN
2 OHMS, ORACOMBINATION OF SPEAKERS THAT
TOGETHER ARE LESS THAN 2 OHMS!
Using one speaker, II must be rated at 2 ohms minimum.
Using tmw speaker\, they must be rated each at 4 ohm\ mmimum.
A
AVIS!
Pour assurer la Fiabilte et obtenit une performance optlmale, ne
AVEC un H.P., II Faul unr charge d'unpedance minimum de 2 ohms.
AVEC dew H.P., il Faut pour chaoun une charge d'impedance
AVEC trms H.P., II Faut pour chaoun une charge d'unpedance
minimum de 8 ohm\.
should be enabled
for speaker protection
Left Output
from Mixer
Right Output
from Mixer
must be in
Stereo Position
DDT Compression
should be enabled
for speaker protection
Output from
Mixer
Optional Filter:
Depress to
eliminate Low -
Frequency rumble
Channel B is
disabled - do not use
Mode Switch:
Must be depressed
to Bridge Position