M-Audio keystation mini 32 mk3 Anleitung Seite 8

Edit Button: The Edit button is used to access the advanced Keystation Mini 32 MK3
functions located on the keybed.
Pressing the Edit button switches your keyboard into Edit Mode. The Edit button turns
blue, and you can use the keys to select various advanced functions and enter data.
Depending on the function, your keyboard will exit Edit Mode as soon as a function is
selected, or the Cancel or Enter keys are pressed. At this point, the Edit button light will
dim, and the keyboard can be used for playing notes again.
To change the functionality of the Mod button, Volume knob, etc.:
1. Press Edit, the Edit button will now be fully lit.
2. Press the button corresponding to the control you would like to change (for
example: Mod).
3. Use the numeric keys to enter the value of the control, and then press the
Enter key.
4. If you have made an error while entering the control value, you can press
Cancel to exit Edit mode without making changes.
To reset the keyboard to its factory defaults:
1. Make sure your computer is powered on.
2. Power the Keystation Mini 32 MK3 by plugging in the USB Cable from your
computer while simultaneously holding down the Octave + and – buttons.
Warning: This product contains chemicals, including lead, known to the State of California to cause cancer,
and birth defects or other reproductive harm. Wash hands after handling.
8