After Ironing; Cleaning & Maintenance - Bosch TDi95 serie Gebrauchsanleitung

Cleaning & Maintenance
18
BO S C H
8. Spray
Spray can be used to remove stubborn wrinkles.
1 When ironing, press the spray button (5) and water
will spray out of the spray nozzle (9) onto the
garment.

9. After ironing

1 Unplug the iron from the mains socket.
Empty the water tank.
2
3 Set the iron aside in a vertical position on its heel (13)
to cool down.
4 Coil the power cable (14) loosely around the heel of
the iron. Store the iron in an upright position.
Tip: For immediate storage of the iron, you may use the
"StoreProtect " accessory (see "Accessories" section).
E
Attention! Risk of burns!
Always unplug the appliance from the mains
supply before carrying out any cleaning or
maintenance operation on it.
1 If the iron is only slightly soiled, pull out the plug and
allow the soleplate (12) to cool down. Wipe the
housing and the soleplate with a damp cotton cloth
only.
To keep the soleplate smooth, you should avoid hard
2
contact with metal objects. Never use a scouring pad
or chemicals to clean the soleplate.