Optional Accessories; Exploded Drawing And Spare Parts List - Mafell DDF 40 Originalbetriebsanleitung

Defect
Machine stops while drilling is in
process
Burn marks on the drill holes
Chip ejection blocked
8

Optional accessories

- Dowel drill bit - HS-TiN Ø 3 mm (0.118 in.)
- Dowel drill bit - HM Ø 5 mm (0.196 in.)
- Dowel drill bit - HM Ø 6 mm (0.236 in.)
- Dowel drill bit - HM Ø 6.1 mm (0.240 in.)
- Dowel drill bit - HM Ø 8 mm (0.314 in.)
- Dowel drill bit - HM Ø 8.1 mm (0.318 in.)
- Dowel drill bit - HM Ø 8.2 mm (0.322 in.)
- Dowel drill bit - HM Ø 10 mm (0.393 in.)
- Dowel drill bit - HM Ø 10.1 mm (0.397 in.)
- Dowel drill bit - HM Ø 10.2 mm (0.401 in.)
- Dowel drill bit - HM Ø 12 mm (0.472 in.)
- Dowel drill bit - HM Ø 12.2 mm (0.480 in.)
- Lateral stop set SA 320
- Trim stop LA
- Dowel drilling template clamping device, 800 mm (31.496 in.)
- Dowel drilling template extension 1600 cpl., length 1600 mm (62.992 in.)
- Screw clamp with stop (for working with dowel drilling template extension)
- Screw clamp (for rail fixing on the workpiece)
- Wood dowel see specialised trade, DIY store etc.
9

Exploded drawing and spare parts list

The corresponding information in respect of spare parts can be found on our homepage: www.mafell.com
Cause
Mains failure
Feed speed too low
Blunt drill bit
Wood is too damp
Extended drilling without
extraction
-28-
Elimination
Check mains back-up fuses
Increase feed speed
Regrind drill bit or replace
Connect machine to an external
extraction, e.g. portable dust
extractor
Order No. 090 083
Order No. 090 089
Order No. 090 096
Order No. 090 120
Order No. 090 097
Order No. 090 122
Order No. 090 123
Order No. 090 098
Order No. 090 124
Order No. 090 125
Order No. 090 099
Order No. 090 127
Order No. 206 490
Order No. 206 491
Order No. 203 980
Order No. 203 434
Order No. 093 280
Order No. 093 281