Start-Up - ADE CK 1704 Bedienungsanleitung

Start-up

For use, you will need two LR03 (AAA), 1.5V batteries.
1. Push the locking tab in the direction of the battery
compartment cover and remove it.
2. Insert the batteries as shown on the bottom of the battery
compartment. Pay attention to the correct polarity (+/-).
3. Replace the battery compartment cover and press it down.
The locking tab must audibly engage.
Once the batteries are inserted, the clock switches to the receiving
mode, see next chapter.
Notes on changing the battery:
‚ Only use the battery type specified in the "Technical Data".
‚ Always exchange all of the batteries at the same time.
‚ Dispose of old batteries in an environmentally friendly
manner, see "Disposal".
39