Use And Operation - Klarstein 10030310 Hinweise

Insert the plug into the supply socket. Press switch button,the machine begin to work. There are 3 possible
positions for the switch:
0 Stands for turn off, the socket is not electrify.
I Stands for turn on,the socket is electrify.
II The vacuum cleaner is switched off. If the plug is be-
ing used by an external device, the vacuum cleaner
starts to operate after 5-8 seconds. If the plugged
device is being switched off, the vacuum cleaner
will run for another 5-8 seconds. This is particularly
helpful when using a drilling machine.
Operation of blower
• Always wear safety goggles before using the blower.
• Keep bystanders clear from blowing debris.
• Wear a dust mask if blowing creates dust that might be inhaled.
Make sure that the power cord is dis-
connected from the socket.
Insert the main cannula of the hose
assembly into the air outlet on the top
of the head and tighten it with the right
hand rotation.
Start the switch button.
11

Use and Operation

Unscrew the inserted hose assembly
from the suction port with a left-hand
rotation.
Insert the power cord.
Hold the hose assembly, let outlet port
aimed at the leaves and so on.