Cleaning And Care - Klarstein 10031828 Bedienungsanleitung

Assembly
1. Connection: Insert the hose connector into
the air inlet mouth as picture shows,make
sure the connector is tightly fastened.
2. Check whether the dust filter is put in before
operation
3. Take away all the things in barrel including the
dust filter before the wet use
4. Insert the plug into the supply socket
5. Press switch button,the machine begin to
work
Cleaning the Barrel
After use or when the barrel is full of dust (which is accompanied by a noticeable loss of suction), the barrel
must be emptied.
1. Unfasten the locking knob and remove the top cover.
2. Remove the filter bag and clean out the dust from the dust barrel.
3. Replace the filter bag and top cover, and fasten the locking knob.
Cleaning the filter bag.
1. Remove the filter.
2. Gently wash in clean, warm water only.
3. Allow to dry completely before reassembly.

Cleaning and Care

8