Switching Off; Temperature Regulation; Shopping Function - Electrolux IK3026SL Benutzerinformation

It is possible to change predefined sound
of buttons to a loudly one by pressing
together Mode and temperature colder
3.2
Display
A B C
Off
min
I H
3.3 Switching on
Connect the mains plug to the power
socket.
Press the ON/OFF button if the display is
off.
If DEMO appears on the display, the
appliance is in demonstration mode. Refer
to "Troubleshooting" section.
The temperature indicators show the set
default temperature.
To set a different temperature refer to

"Temperature regulation".

3.4 Switching off

Press the ON/OFF button for 5 seconds.
The display turns off.
To disconnect the appliance from the
power, disconnect the mains plug from
the power socket.
3.5 Temperature regulation
The default set temperature for the fridge
is +5°C.
Set the temperature of the fridge by
pressing the temperature button.
The temperature indicator shows the set
temperature.
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.
D E
G F
button for some seconds. Change is
reversible.
A) Timer function
B) Fridge OFF indicator
C) Shopping function
D) Action Freeze function
E) Temperature indicator
F) Alarm indicator
G) ChildLock function
H) DrinksChill
I) FreeStore function

3.6 Shopping function

If you need to insert a large amount of
warm food, for example after doing the
grocery shopping, we suggest activating
the Shopping function to chill the products
more rapidly and to avoid warming the
other food which is already in the
refrigerator.
1. Press the Mode until the
corresponding icon appears.
The Shopping indicator flashes.
2. Press the OK to confirm.
The Shopping indicator is shown.
The Shopping function shuts off
automatically after approximately 6 hours.
To switch off the function before its
automatic end, repeat the procedure.
The function switches off by
selecting a different fridge set
temperature.
3.7 Action Freeze function
1. Press the Mode button until the
corresponding icon appears.
The Action Freeze indicator flashes.
2. Press the OK button to confirm.
The Action Freeze indicator is shown.
This function stops automatically after 52
hours.
To switch off the function before its
automatic end repeat the procedure until
The Action Freeze indicator goes off.
ENGLISH 61