Owner's Information - Sole Diesel MINI-17 Betriebshandbuch

INSPECTION PRIOR TO THE DELIVERY OF PROPULSION ENGINES
Installer / Marina information
Installer Company:
Contact Tel. no.:

Owner's Information

Name and surnames:
Contact Tel. no.:
Ingine Information
Engine model:
Engine serial number:
Installation Information
Machine chamber operating temperature:
Angle of the engine (boat moored):
Maximum angle of the engine (navigation conditions):
Is the wet exhaust ebow above or below the floating line?
Propulsion Line Information
Boat model:
Shaft diameter:
Propeller diameter:
Exhaus, Cooling and Fuel Line Information
Int. Diameter of exhaust hose:
Int. Diameter of diesel intake:
Int. Diameter of diesel return intake:
Has an exhaust collector been installed?
Verifications Prior to Start-Up
Correct engine alignment.
Electrical installation connections
Engine oil level
Gearbox oil level.
Coolant level and concentration
Control lever operation
Transmissions belts and belt tension
Airtight sea water cock.
Verification of Engine No-Load Operations
Unusual noises from the transmission
Oil pressure
Bleed the fresh water cooling system
Verify the instrument panel: normal indications and alarm
operation.
Water, oil and fuel leaks in the engine or transmission.
mm
mm/inches Propeller pitch:
mm
mm
mm
YES
NO
Installation Date:
E-mail:
Email:
Gearbox / Saildrive serial nº.:
Gearbox / Saildrive transmission ratio:
Shaft length:
mm/inches
Int. Diameter of sea water intake to the
pump:
Has an air trap been installed?
V/x
V/x
ºC
º
º
above
mm
Nº. Of propeller
blades:
Notes
Notes
below
mm
YES
NO