Unpacking; Correct Use - IKA ULTRA-TURRAX Tube Drive P control Betriebsanleitung

4

Unpacking

• Unpacking:
- Please unpack the device carefully
- In the case of any damage a fact report must be set immedi-
ately (for post, rail or forwarder)
• Delivery scope:
- Tube Drive P control
- Power supply unit with exchangeable adapters
- Removal hook
- Plastic hose
- Operating instructions
- A warranty card.
Power supply unit with exchangeable adapters
US Europe
(N)
Australia
(A)
~
Additional in the suite-case variant:
1 x ST-20 1 x DT-20
1 x BMT-20-S 1 x BMT-20-G
UK
(E) (B)
China
(C)
5

Correct use

• Use:
Application
Mixing
 with Tube ST-20...
 with Tube ST-50... Stirring
Dispersing
 with Tube DT-20...
Stirring
 with Tube DT-50...
Crushing
 with Tube BMT-20...
 with Tube BMT-50... Mixing
wet/dry
Crushing
 with Tube DIS 50...
 with Tube DIS 300...  Mixing
Dissolving
wet
Note: When the DIS 300-S-M tube is used, please remove the

drain opening plug and connect the included plastic hose to the drain
opening before operation!
Thus, the liquid can be drained out to a suitable vessel (more than
300 ml) in case of leakage of the DIS-300 S-M.
The vessel must be underneath the device and the hose mustn't
bend upwards).
For removing the plastic hose, press the flange of the drain open-
ing, meanwhile, pull the plastic hose out.
> 20 mm
Volume Mode
2 - 15 ml A, B, P1-P9,
15 - 50 ml Turbo, Rev
5 - 15 ml A, B, P1-P9,
15 - 50 ml Turbo, Rev
2 - 15 ml A, B, P1-P9,
15 - 50 ml Turbo, Rev
15 - 50 ml A, B, P1-P9,
100 - 300 ml Turbo
(for DIS 50 only)
Rev
18