auna Areal Bar 700 Bedienungsanleitung Seite 24

• Connect a USB storage device to the sound bar.
• Press SOURCE button (U3 Unit or R2 Remote) repeated until you see USB mode, if not already in that
mode. You will see "USB" appear on the display. Select a file you want to play by pressing PREVIOUS/
NEXT.
• Press OPTION (R6 on remote) repeatedly, the display will be changed in the following order: repeat >
repeat all > random > normal
Please note:
• This product may not be compatible with certain types of USB storage device.
• If you use a USB extension cable, USB HUB, or USB multi-reader, the USB storage device may not be
recognized.
• The resume point may be cleared when you pull out the power cord or removing the USB device from
the unit.
Sleep timer: The unit can be set to enter STANDBY mode after a period of time. For example you may
wish to fall asleep while listening to your TV or a connected MP3 player. Follow the below steps. During
playback mode of either TV, COAX or AUX modes, press the SLEEP button (13) to enter the timer settings.
Press the SLEEP button repeatedly to cycle through the available time duration options of :- 5, 10, 15, 30,
45, 60 & 90 minutes. When you have selected the required timer duration, just leave all buttons untouched
for 2 seconds and the timer will begin the countdown. When the timer elapses the STANDBY mode will be
activated.
Adjusting the display brightness: Press DIM (14) repeatedly to cycle through the 3 brightness states.
24
USB
Additional Function