Removing The Rechargeable Shaver Battery; Warranty And Support; Warranty Restrictions - Philips SW9700 Bedienungsanleitung

Removing the rechargeable shaver battery

Warranty and support

Warranty restrictions

Only remove the rechargeable battery when
you discard the shaver. Before you remove
the battery, make sure that the shaver is
disconnected from the wall socket and that
the battery is completely empty.
Take any necessary safety precautions
when you handle tools to open the shaver
and when you dispose of the rechargeable
battery.
Be careful, the battery strips are sharp.
1 Insert the screwdriver into the slot between the
front and back panel in the bottom of the
appliance. Remove the back panel.
2 Remove the front panel.
3 Unscrew the two screws at the top of the inner
panel and remove the inner panel.
4 Bend aside the battery lips, which hold the
battery, by placing a screwdriver between the
battery and the lips.
5 Remove the battery.
If you need information or support, please visit
www.philips.com/support or read the
international warranty leaflet.
The shaving heads (cutters and guards) are not
covered by the terms of the international warranty
because they are subject to wear.
25
English