General Product Description; Preparations - witeg LABMAX OE Bedienungsanleitung

2 General product description

Labmax "OE"
The is witeg´s economy dispenser and consists of high precision
components and extreme solid materials "made in Germany". This ensures highest
reproducibility during the complete long life cycle of the device.
Labmax "OE"
The is fully autoclavable at 121 °C and can be completely disassembled for
cleaning. The zero point is part of the construction and automatically calibrated after
assembling.
Each device is single tested and delivered with conformity certificate.
The air-purging is managed through the ejection cannula and therefore no air bubbles get
into the bottle and a contamination of the bottles content with previous used chemicals is
not possible.
Labmax "OE"
The has the witeg´s typical Safety-Lock for your safety at work. Turn the
cannula 180 ° to drain it and avoid further uncontrolled flow of liquid.

3 Preparations

First push the ejection cannula into the
then slide the cannula holder from above
groove. Make sure it fits tightly!
21
20
Push the return tube (21) into the big socket and the suction tube (20)
into the small socket.
Control the length of the suction tube and make sure it fits tightly!
Now you can screw the
((20) and (21) are one tube at the
Labmax "OE"
onto the bottle.
Labmax "OE" 250
- 18 -
valve and
into the
ml)