Safety- And User Precautions; General Safety Precautions - witeg LABMAX OE Bedienungsanleitung

1 Safety- and user precautions

1.1 General safety precautions

In order to put the device into operation as quickly as possible and free from defects, it is
imperative that you read this manual carefully before using this device.
Highest safety precautions should be used when dispensing corrosive, poisonous,
radioactive or hazardous chemicals.
- Observe the general safety regulations for handling chemicals
(e.g. protective clothing, protective goggles).
- Use the Labmax
which is intended.
- Always check the device for leaks, fixed screw fittings and a firm position of the plug
and socket connection (e.g. check hoses, cannulas etc. prior to operation) before you
use it.
- Never use force. Breakage of any part will lead to hazardous exposure for the user as
well as for other persons.
- Clean the device every day.
- The user is responsible for checking that the device is suitable for his application.
- The proper and secure function is only warranted in connection with the supplied
ejection cannula (6). Do not use any other ejection cannula.
- Never use damaged or deformed cannulas.
- The ejection cannula (6) should never face the user and a collection vessel should be
placed underneath.
- If the valve is faulty the cannula might drop.
- Check all screw fittings approximately one hour after each assembling or
disassembling if they are fitting tightly, because leakages might occur due to material
expansion conditional to temperature variations.
- If unsure about dispensing a specific solution, please contact your dealer.
only regarding to the resistance of materials and for the purpose for
- 16 -