1.2 To be considered before initial operation
-
Check that the device has not been damaged in transit.
-
Push cannula on tightly.
-
Do not carry the device at the outer housing (2).
-
Push ejection cannula (6) on tightly and slide the cannula holder (7) into the
formed grooves.
-
When screwing on the bottle do not grip the device at its outer housing (2).
-
Do not pump before the device has been assembled completely and a collecting
vessel has been placed underneath.
1.3 Warranty
witeg warrantees the
workmanship for 12 months from the date of purchase. witeg´s responsibility is limited to
the repair or replacement of the Labmax.
This warranty is valid only if the
and for the purpose for which it is designed.
witeg is not responsible for consequential damages resulting from the misuse of this
equipment.
1.4 Operating limitations
Labmax "OE"
Use for
nearly all liquids
PTFE swelling
hydrofluoric acid
Don´t use for
solutions of substances catalysed by platinum-iridium alloys
The temperature of the
Labmax
you have received is free of defects in material and
Labmax
is used in the manner described in this manual
Labmax "OE S"
PTFE swelling
Solvents,
hydrofluoric acid
solutions which contains any form of solids
Labmax "OE"
and reagent should not exceed 40 °C (104 °F).
Labmax "OE HF"
hydrofluoric acid
solvents
PTFE swelling
- 17 -
solvents