Zgonc yellow gardenline 720 YGL N.G. Originalanleitung Seite 43

Scraper Blade & Skid Shoes
The scraper blade allows better contact with the surface being cleared. It also prevents damage to the housing from normal use.
The skid shoes are located on each side of the auger housing and control the distance between the scraper blade and the ground. Ad-
just skid shoes equally to keep the scraper blade level with the ground.
The scraper blade & skid shoes are subject to wear and damage. Both scraper blade and skid shoes are adjustable to compensate for
wear. They should be checked and adjusted periodically. Replace when necessary.
m
Damage to auger housing will result if scraper blade wears down too far.
Both scraper blade and skid shoes have two wear edges. When one side wears out, they can be rotated 180o to use the other edge.
Drive Clutch Lever
Squeeze the clutch lever against the handgrip to engage the wheel drive. Release to
disengage.
m
Always release the drive clutch lever before changing speeds. Failure to do so will
result in damage to the snow thrower.
Auger Clutch Lever
Squeeze the clutch lever against the handgrip to engage the auger and start snow
throwing action. Release to disengage.
When both auger clutch lever and drive clutch lever are engaged, the drive clutch lever
will lock the auger clutch lever in the engaged position. This allows you to release your
left hand from the handle and adjust the discharge chute direction without interrupting
the snow throwing process.
43
D GB