Beyerdynamic UNITE TP Kurzanleitung Seite 24

24
The status indicator
following information:
Indicator light
Off
Green
Flashing yellow
Yellow
Flashing green/
yellow
Flashes red 5 times
Flashing red rapidly • Operating error
In order to perform a simple pairing, proceed as
described in the following:
1. Set the desired group ID on the transmitter you want
to use for pairing. See chapter 5.2 for reference.
2. Insert only one transmitter into the charging slot of
the charger. If multiple transmitters are inserted into
the charging slots of the charger, the pairing will not
start and the status indicator
Unite TP – Bodypack Transmitter
on the charger shows the
Operating status
Device is switched off
• Device is ready to use
• No pairing information
saved
Pairing information is being
copied to the charger or re-
ceiver
Pairing information has been
stored in the charger
Device is being localised
• No transmitter
• Too many transmitters
• Charging error
on the charger will