General Operation - Beyerdynamic UNITE TP Kurzanleitung

Unite TP – Bodypack Transmitter

4. General operation

• Important: Before using the bodypack transmitter for
the first time, you must charge the built-in battery.
Please use an appropriate Unite charger.
• Connect a headphone or induction loop to jack
socket .
• Connect a microphone to the 4-pin mini XLR connector
or use a headset with the connector
• Hold down the on/off button to switch on the transmitter.
• The integrated microphone
"internal" mode or the "auto" mode, without an exter-
nal microphone being connected, has been selected
as an audio source in the menu.
• In order to establish an audio connection between a
transmitter and one or more receivers, all devices
must be paired together. See chapter 5.
• All devices are supplied with the group ID 256 and
fixed audio encryption allowing quick and easy initial
use.
• The transmitter will only transmit the audio signal on a
channel with a predefined channel name. If there are
several transmitters in a group, the channel for the
respective transmitter can be selected on the receiver.
• If you require several device groups or an audio trans-
mission secure against eavesdropping, follow the
steps in chapter 5 to create a new pairing.
• If you require several device groups or an audio trans-
mission even more secure against eavesdropping, to
avoid listening by other groups using Unite devices,
follow the steps in chapter 5 to create a new pairing.
.
will be activated if the
17