Herunterladen Inhalt Inhalt Diese Seite drucken

Periods Of Non-Operation; Troubleshooting - Electrolux EJ2302AOW2 Benutzerinformation

Vorschau ausblenden Andere Handbücher für EJ2302AOW2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

A certain amount of frost will always form
on the freezer shelves and around the top
compartment.
Defrost the freezer when the frost layer
reaches a thickness of about 3-5 mm.
1. Switch off the appliance, or pull out
electrical plug from the wall socket.
2. Remove any stored food, wrap it in
several layers of newspaper and put it
in a cool place.
3. Leave the door open.
In order to speed up the defrosting
process, place a pot of warm water in

8. TROUBLESHOOTING

8.1 What to do if...
Problem
The appliance does not op-
erate.
The appliance is noisy.
The lamp does not work.
About 12 hours prior to
defrosting, set a lower
temperature, in order to build
up sufficient chill reserve for
the interruption in operation.
WARNING!
Do not touch frozen
goods with wet hands.
Hands can freeze to the
goods.
WARNING!
Refer to Safety chapters.
4. When defrosting is completed, dry the
5. Switch on the appliance.
After three hours reload the previously
removed food into the freezer
compartment.

7.5 Periods of non-operation

When the appliance is not in use for long
periods, take the following precautions:
1. Disconnect the appliance from
2. Remove all food.
3. Leave the door/doors open to prevent
Possible cause
The appliance is switched
off.
The mains plug is not con-
nected to the mains socket
correctly.
There is no voltage in the
mains socket.
The appliance is not sup-
ported properly.
The lamp is in stand-by.
The lamp is defective.
the freezer compartment. In addition,
remove pieces of ice that break away
before defrosting is complete.
interior thoroughly.
electricity supply.
unpleasant smells.
WARNING!
If the cabinet will be kept on,
ask somebody to check it
once in a while to prevent the
food inside from spoiling in
case of a power failure.
Solution
Switch on the appliance.
Connect the mains plug to
the mains socket correctly.
Connect a different electri-
cal appliance to the mains
socket. Contact a qualified
electrician.
Check if the appliance
stands stable.
Close and open the door.
Refer to "Replacing the
lamp".
ENGLISH
23

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis