electricity accumulations or instable power supply occur. In that case, the location
must be changed.
7.2 Unpacking
Take the balance out of their packaging and place it at the intended position. When
using the power pack, ensure that the power cable does not produce a risk of
stumbling.
7.3 Scope of delivery
Balance
Power pack unit
Operating instructions
7.4 Placing
Carefully remove the balance from the packaging, remove plastic cover and setup
balance at the intended workstation.
Make sure that all transport locking devices are removed
To loosen the transport guard screw out transport screw [1] anticlockwise.
For transportation carefully screw-in transport screw clockwise till to the stopper
and then fix it using locknut.
MBC-BAPS-e-1811
11