Charging / Battery; Charging The Scooter - SXT NEO Benutzerhandbuch

Charging the e-scooter
1. First plug the charger cable into the socket (the LED on charger lights up red) and then connect charging socket of your SXT NEO.
When the battery is full, the LED turns red and green alternately.
At this point you can remove the charger and close the protective cover on the scooter again.
2. Standard charging time: The e-scooter is at room temperature of 10 ° C - 50 ° C with the supplied charger within loaded from
2-3 hours.
3. The charger has overcharge protection, which can be damaged if the current input is too high. The charging current must be below
2A. Long-term charging at high voltage can damage the battery and shorten it Lifetime of the battery.
Wichtige Hinweise

5. Charging / battery

3 1 3 1
E