First Drive - Sxt Neo Benutzerhandbuch

E
First ride
Please fully charge your scooter before the journey starts! Please follow charging instructions below
Stand with one leg on the scooter press the ON button twice. Gently operate the throttle. Pay attention to a stable and adjusted speed.
Brake with the brake lever and stand on the fender above the rear wheel.
To familiarize yourself with the SXT NEO as soon as possible, it is best to drive your first drive in an area free of obstacles. Before you drive
it for the first time, you should test that all parts are working normally. If you have the Press the on / off button, the display lights up.
At the beginning, only the Bluetooth symbol will be displayed, if you press the on / off switch again, more information will be shown in the
display (battery indicator, light on / off, speed, etc). Only then can the SXT NEO be driven. When you press the Speed button (right side),
be sure to hear any unusual noises or blockages to make sure everything is working properly. Check the brakes of the scooter by first driving
at low speed and pressing the brake button (left). Similarly, test the rear brake by pressing the rear brake. Once you've determined that
everything is working normally, you can continue to use the scooter
Wichtige Hinweise 4. Drive
3 0 3 0