Hints On Disposal; Declaration Of Conformity - Klarstein 10029294 Anleitung

Problem
Indicator light on the display is
not on.
The water is flowing,ice is
made,however no release of ice.
Everything is correct but no ice is
made.
Spray pipe jammed.
According to the European waste regulation 2002/96/EC this symbol on the product
or on its packaging indicates that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For more de-
tailed information about recycling of this product, please contact your local council or your
household waste disposal service.
11
Possible Cause
Control panel wire line is loosen.
Control panel is broken.
Temperature sensors are connec-
ted by mitake.
Refrigerant leaks.
Cooling system blocked.
Step 1: Take down the spray pipe from the evaporator.
Step 2: Take off the pipe plug from the spray pipe.
Step 3: Let water flow from the pipe for a while. Fix the spray pipe
from step 3 to step 1.

Hints on Disposal

Declaration of Conformity

Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)
Solution
Call for service.
Call for service.
Call for service.