Product Description; Operating Information - H-tronic AL 300pro Betriebsanleitung

Product description

With this automatic charger all 2–6–12V lead acid batteries can be charged
automatically. When the connected battery is completely charged, the current
will be reduced to prevent overcharging. Due to the automatic voltage and
current control the connected battery will always stay completely charged
and at the same time the overcharging as well as the gas development will
be prevented.
The product has the following features:
 limited time short circuit and wrong polarity prevention
 constant final charging current
 optical display for charging and polarity
 adjustment of the charge-voltage with slide switch
This article has been checked according to EU-regulations 89/336/EWG
(EMVG, 09.11.1992) and is according to law requirements. The changing of
the switch or the usage of other components as indicated leads to an extin-
guish of this approval.

Operating information

In contrast to simple chargers the charging current of this automatic charger
is not constant and depends on some components, for example the actual
charging level of the battery, the age of the battery, the type of the battery
and the capacity. Also it is important how much the battery has been dischar-
20 Automatic-Charger