Herunterladen Inhalt Inhalt Diese Seite drucken

Operating Functions When Using A Mobile Phone; Talking Directly From Helmet To Helmet (Intercom) - AKE 201 Bedienungsanleitung

Bluetooth - stealth - helmset
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

the Bluetooth helmet set and ask your partner to test the voice quality on a landline
phone. For further information please refer to the manual of the navigation system.

Operating functions when using a mobile phone

Calling tone:
Adjust your mobile phone in such a way that the ring tone in the
helmet is heard. For
adjust to shortly, the start of signal will be lost when audio is in stand by mode.
Accept phone calls
phones it is possible to activate the automatic call acceptance. This would
reduce the handling to a minimum.
Reject incoming phone calls with double klick:
shortly twice to reject a incoming phone call.
End phone calls
: Short klick at the multifunctional key or just wait until your
calling partner hangs up, the connection will automatically end.
Making phone calls
ber at your mobile phone.
Redialling
: If you like to redial the last number, please press the multifunctio-
nal key shortly twice.
Voice dialling (not at all mobile phones available)
button approx. 4 sec. to start the voice dialling.
Switching a call from phone to the Bluetooth helmet set and vice versa
To switch an active call between your phone and Bluetooth helmet set, refer to
mobile phone menu or press the multifunctional button one time.
Volume
: The volume can be changed on the
mobile
. When reaching the maximum or minimum volume it will be indicated with
an adequate acoustic signal.
Autoconnect
:
Not all mobile phone automatically get connected with the Bluetooth
hel-met set when being turned on. The connection can be made through the
mobile phone
.
Call Back by multipoint operation with intercom and phone:
multifunction button switches between the partners back and forth.
For the multifunctional key optionally, an external button can be used. Please
refer to the section "Important safety advices" below.

Talking directly from helmet to helmet (intercom)

For this you need a
Stealth Bluetooth Helmet Set 201 and a Stealth Bluetooth Helmet
Set 201i (Intercom set).
26
automatic call acceptance
: Press one time short the multifunction key. At many mobile
: If you make phone calls, you have to enter the phone num-
As the systems used are with low radiation they cause no
the ring melodie
Press the multifunctional key
: Press the multifunctional
Bluetooth helmet set and on the
Double click on
should not

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

201iSet 200201 bm

Inhaltsverzeichnis