Switch-On And Switch-Off; Pairing; Specific Information For Pairing With Some Devices; Using A Navigation System - AKE 201 Bedienungsanleitung

Switch-on and switch-off

Press the multifunctional button (8) for approx. 3 sec. to turn on the Bluetooth
helmet set. The function display will flash blue to indicate availability. Press the
multifunctional button for approx. 3 sec. to turn off the Bluetooth helmet set. When
switching off, a light will show in the display.
Control tone for communication (Duplex )

Pairing

Before using your Bluetooth Helmet Set for the first time, you have to pair it with
your Bluetooth device. For instructions on setting up and pairing of other Bluetooth
devices, please refer to the respective user manuals.
Please start with a switched-off Bluetooth helmet set. Turn off all other Bluetooth
devices not needed for the pairing.
1. Press multifunctional button (8) for approx. 3 seconds. Release button when
indicator light flashes red and blue. The Bluetooth helmet set is now ready to
pair with any compatible Bluetooth device.
2. Now put the respective Bluetooth device into pairing mode.
Only for BT-HS 201: At mobile phone or navigation systems you usually find this
option in the menue "searching for Bluetooth devices in the area". If using this
option, please select the "
3. When asked for a code word, please enter 0000. The Bluetooth helmet set
flashes blue when it is paired successfully. The Bluetooth helmet set will show a
blue light after a successfull pairing.

Specific information for pairing with some devices

Bluetooth originally was made as a worldwide uniform standard. Unfortunately,
some producers of GPS, etc. do not comply to regulations. Therefore it might lead
to imcompatibilities. For further information please check our FAQs on our website.

Using a navigation system

The Stealth Bluetooth Helmet Set 201
work with a headset profile or A2DP profile. If the connection is interrupted, it can be
activated by pressing the multifunctional button (wait for control tone).
Not all GPS will automatically connect with the Bluetooth Helmet Set, if they are turned
on last. The connection has than to be activated by using the GPS menue.
Navigation systems with connected mobile phone: To operate the mobile phone
through the navigation screen might be tempting but the voice transmission through
the navigation system is often not very good. To test, pair the mobile phone directly with
on : low high
AKE Helmet Set 201
is compatible with all navigation systems that
, off : high low
" for pairing.
25