Abus wAppLoxx Control Kurzanleitung Seite 23

2
Option 2:
English
Connecting the wAppLoxx Control to a router/switch
• Connect your PC/laptop to the router/switch.
• Connect the wAppLoxx Control to the router/switch.
• Connect the wAppLoxx Control to the power supply.
• If a DHCP server is available on your network (IP address
is assigned automatically via the router), set the network
interface of your PC/laptop to "Obtain an IP address
automatically".
• If no DHCP server is available, configure the network interface
of your PC/laptop to 192.168.0.2, the default gateway to
192.168.0.1 and the subnet mask to 255.255.255.0.
• Open the wAppLoxx Control finder. You can find the software
by clicking on the following link: abus.com
23