HumanTechnik PR22+ Bedienungsanleitung Seite 11

How to attach the carrying cord / belt clip
The receiver includes a carrying cord and belt clip, which can be attached to the rear
side of the device. To attach the clip to the receiver, place the clip on the hook
the back of the device. Now turn the clip 180° until it snaps into place.
Connect special accessories
You can connect the following products to the 3.5 mm audio output
»PR22+«:
- DIR under-the-chin receiver
- Unobtrusive earphones
- Lightweight headset
- Teleloop
Using the »PR22+«
Switch the device on by means of the volume control. The red LED lights up when the
device is switched on. Make sure that the connected audio source is switched on and
adjust the volume of the »PR22+« according to your preference.
- Audio-Cable binaural
- Audio-Cable monaural
- Induction Link binaural
- Induction Link monaural
5
on
of the
6
English 11