Werbung
System requirements
•
1x Thunderbolt
•
2x HDMI
•
Important: Your computer must support Thunderbolt
with this adapter. While Thunderbolt
nector, not all USB Type-C
check the specifications of your computer system to confirm which USB
Type-C
™
Installation
1.
Connect the integrated cable of the DockingStation Thunderbolt
graphics source, such as a PC or notebook with Thunderbolt
2.
Connect HDMI
connection: two different types of HDMI
3.
Power on PC and monitors. Select monitors to correct input source.
4.
Change the display to clone or extend mode, change the output
display resolution on your computer.
It is recommended that to use the same size, type and resolution
monitors for connecting. Same type monitor means the monitors have
the same native resolution and display refresh rate.
After installation, you will see the same image on all monitors (clone
mode) or a single image spread across multiple monitors. To change
the display setting, simply change the graphic card output resolution
via the display properties page.
NOTE: Display resolution with 2 connected 4k monitors
up to 3840x2160@60 Hz /each
5.
Connect USB devices and existing LAN cable to the additional ports
on the DockingStation.
Manual IB-DK405-TB3
3 enabled Windows
™
enabled monitors with cabling (not included).
®
ports on your computer support Thunderbolt
output to monitor (cables not included). Maximum
®
/macOS
®
3 utilizes the USB Type-C
™
connectors support Thunderbolt 3
™
monitors.
®
HDMI
computer
®
3 in order to work
™
™
. Please
™
3.
™
3 to a
™
3 interface.
™
con-
Werbung
