Werbung
System requirements
•
1x Thunderbolt
•
2x DisplayPort
•
Important: Your computer must support Thunderbolt
work with this adapter. While Thunderbolt
connector, not all USB Type-C
Please check the specifications of your computer system to confirm
which USB Type-C
Installation
1.
Connect the integrated cable of the DockingStation to a graphics source,
such as desktop or notebook PC with Thunderbolt
2.
Connect DisplayPort
mum connection: two different types of DisplayPort
3.
Power on PC and monitors. Select monitors to correct input source.
4.
Change the display to clone or extend mode, change the output
display resolution on your computer.
It is recommended that to use the same size, type and resolution
monitors. Same type monitor means the monitors have the same native
resolution and display refresh rate.
After installation, you will see the same image on all monitors (clone
mode) or a single image spread across multiple monitors. To change
the display setting, simply change the graphic card output resolution
via the display properties page.
NOTE: Display resolution with 2 connected 4k monitors
up to 3840x2160@60 Hz /each
5.
Connect a USB device and existing LAN cable to the additional ports
on the DockingStation.
Manual IB-DK406-TB3
3 enabled Windows
™
enabled monitors with cabling (not included).
™
ports on your computer support Thunderbolt
™
output to monitor (cables not included). Maxi-
™
/macOS
®
3 utilizes the USB Type-C
™
connectors support Thunderbolt 3
™
Display
port
computer
®
3 in order to
™
3 interface.
™
monitors.
™
™
.
™
3.
™
Werbung
